CUSTOM FRAME BAGS

Full frame bag with rolltop - 220$CAD + tax

Full frame bag with zipper - 190$CAD + tax

Half frame bag with zipper - 150$CAD + tax

Add-on: Zipper pocket (fully lined, non-drive side)  - 35$CAD + tax

Add-on: Net Mesh Pocket (external, non-drive side) - 20$CAD + tax

* all frame bags come with an exit port on the downtube panel for USB cable or water hose.

* 2.5" wide by default

* for some large frames 60cm and up - extra 20$CAD charge

Materials:

  • 1000D Nylon DWR/PU exterior (Cordura™ or similar)
  • 600D Montana™ Polyester liner (Orange)
  • Sunguard™ UVR bonded polyester B92 thread (anti-wicking)
  • Velcro™ fastening system (Made in USA)
  • Heavy duty industrial buckles
  • Flatweave nylon webbing
  • YKK #5 Aquaguard Zipper 

 Providing a Frame Tracing

Cardboard
Scissors
Masking Tape
Marker

1.Trim cardboard to approximate size of frame triangle
2.Tape cardboard to frame triangle so that its nice and flat
3.Trace interior of the triangle. For straight tubes, you can make marks at the tube junctions, then use a straight edge to connect the marks. Any curvature must be traced (you need to angle your marker to get an exact marking/tracing)
4. Place the cutout cardboard inside the bike frame to ensure you made the exact cut.
5.Mark and label all water bottle bosses and cable stops (on the inside and outside of frame triangle)
6. Mark and label where the front derailleur clamp or braze on is located
7. Specify the year, make, model, and size of the frame
8. Include your name and contact information on the pattern

Contact directly to place an order: atwateratelier@gmail.com