CUSTOM FRAME BAGS


Full frame bag with rolltop - 200$CAD + tax

Full frame bag with zipper - 180$CAD + tax

Half frame bag with zipper - 140$CAD + tax

Add-on: Zipper pocket (fully lined, non-drive side)  - 25$CAD + tax

Add-on: Net Mesh Pocket (external, non-drive side)) - 15$CAD + tax

* all frame bags come with an exit port on the downtube panel for USB cable or water hose.

* 2.75" wide by default

* extra 10$ for large frame sizes (54cm TT and higher)

Materials:

  • 1000D Nylon DWR/PU exterior (Cordura™ or similar)
  • 600D Montana™ Polyester liner or 200D Nylon Marilite (please specify)
  • Sunguard™ UVR bonded polyester B92 thread (anti-wicking)
  • Velcro™ fastening system (Made in USA)
  • Heavy duty industrial buckles
  • Flatweave nylon webbing
  • YKK #5 Aquaguard Zipper 

    Available colors for the outside of the frame bag

     

    Providing a Frame Tracing

    Things you'll need:
    Cardboard Sheer
    Masking Tape
    Marker

    1.Trim poster/paper to approximate size of frame triangl
    2.Tape poster/paper to frame triangle so that its nice and flat
    3.Trace interior of the triangle. For straight tubes, you can make marks at the tube junctions, then use a straight edge to connect the marks. Any curvature must be traced (You need to angle your marker to get an exact marking/tracing)
    4. Place the cutout cardboard inside the bike frame to ensure you made the exact cut.
    5.Mark and label ALL water bottle bosses and cable stops (on the inside and outside of frame triangle)
    6. Mark and label where the front derailleur clamp or braze on is located
    7. Specify the year, make, model, and size of the frame (if known)
    8. include your name and contact information on the pattern

    Contact directly to place an order: info@atwateratelier.com